The i-Socket dust control Autoswitch uses a Micro-Controller to monitor and control the in-rush of current when two large motors try to power-up at the same time. The automatic startup delay eliminates an overload on the circuit breaker and the automatic shutdown delay allows the vacuum to clear the hose of any remaining debris.
Runs the vacuum only while you’re using your tool so you save time and electricity
Automatically delays vacuum turn-off by 7 seconds to continue to clear the hose of remaining debris
Reduces airborne toxin that can lead to many health problems
Reduces work area noise because the vacuum only runs while you’re using your tool
2″ x 4″ x 3″
Durable UL-rated 94V, ABS plastic
Standard 15 Amp, 120 VAC, 60 Hz outlet
15 Amp, 120 VAC, 60 Hz
3 prong (grounded) male
Tool outlet connections:
2 or 3 prong plugs
~0.7 Amps (about 85W at 120V)
Miter saw, Table saw, Router, Planer, Sander or other cutting and sanding tools
Wet/Dry Vacuum, Dust Collectors or Power Feed
A software imbedded microcontroller controls the in rush of current when the motor starts up to help eliminate overload of the circuit. Once the tool stops, it provides power to the vacuum for seven seconds to clean out the inlet pipe. It shuts off the vacuum and sits in a ready state for the next use of the tool.