customerservice@dgcproducts.comMon - Fri: 9:00a - 5:00p
  • About DGC Products
  • FAQs
  • Warranty
  • Contact
  • Dealer Signup
  • View Cart
The Original iSocket® Autoswitch The Original iSocket® Autoswitch
  • Key Features
  • Introduction Video
  • How To Use
  • Where To Buy
Buy i-Socket Workshop

The Original iSocket® Autoswitch > Products > iSocket > i-Socket® Workshop

i-Socket® Workshop

$49.95

2-outlet Automatic Vacuum-On Switch

Retaining the proven reliability of our i-Socket® technology, the i-Socket® Workshop is the latest model of the i-Socket® Autoswitch—an essential device in workshops and on jobsites for more than a decade.

The NEW i-Socket® Workshop features

  • Updated design with new components and LED indicators
  • Addition of a Mode Switch and two Accessory Outlets for more device flexibility and control
  • Supports a wide range of cutting tools from rotary handheld devices to large shop saws
  • Runs the vacuum only while you’re using your tool so you save time and electricity
  • Automatically delays vacuum turn-off by 7 seconds to continue to clear the hose of remaining debris
  • Helps to comply with OSHA requirements for dust control
SKU: IS-12W00 Category: iSocket Tags: 120v/15a/60hz, 2 accessory outlets, auto mode switch, auto-on vacuum switch, circuit overload protection, i-socket workshop, intelligent autoswitch, UL rated
  • Description

Description

Technical Information

Specifications:

Dimensions: 4.25″W x 4.5″L x 1.5″D
Finish: Black textured
Case: Durable UL-rated 94V, ABS plastic
Outlet required: Standard 15 Amp, 120 VAC, 60 Hz outlet
Power rating: 15 Amp, 120 VAC, 60 Hz
Input connection: 3 prong (grounded) male
Tool outlet connections: 2 or 3 prong plugs
Actuation Threshold: ~0.5 Amps (about 60 Watts at 120V)
ONE (1) POWER TOOL outlet: Miter saw, Table saw, Router, Planer, Sander or other handheld cutting and sanding tools
TWO (2) ACCESSORY outlets: Wet/Dry Vacuum, Dust Collector, Power Feeder, Task Lighting
Mode Switch: Controls the Accessory Outlets from OFF, ON, and AUTO.
RED Mode LED Indicator is on when in AUTO Mode.
Green Accessory LED Indicator is on when accessory receptacles have power.

Downloads:

WARRANTY
Instant 12 month warranty from the date of purchase, and an extended 24 month warranty with online registration (See Link Below).

 

i-Socket Workshop Data Sheet
Extended Warranty Registration

This Product Is Available At:

AVAILABLE THROUGHOUT THE COUNTRY AT THESE TRUSTED RETAILERS

Technical Information

Specifications:

Dimensions: 4.25″W x 4.5″L x 1.5″D
Finish: Black textured
Case: Durable UL-rated 94V, ABS plastic
Outlet required: Standard 15 Amp, 120 VAC, 60 Hz outlet
Power rating: 15 Amp, 120 VAC, 60 Hz
Input connection: 3 prong (grounded) male
Tool outlet connections: 2 or 3 prong plugs
Actuation Threshold: ~0.5 Amps (about 60 Watts at 120V)
ONE (1) POWER TOOL outlet: Miter saw, Table saw, Router, Planer, Sander or other handheld cutting and sanding tools
TWO (2) ACCESSORY outlets: Wet/Dry Vacuum, Dust Collector, Power Feeder, Task Lighting
Mode Switch: Controls the Accessory Outlets from OFF, ON, and AUTO.
RED Mode LED Indicator is on when in AUTO Mode.
Green Accessory LED Indicator is on when accessory receptacles have power.

Downloads:

WARRANTY
Instant 12 month warranty from the date of purchase, and an extended 24 month warranty with online registration (See Link Below).

 

i-Socket Workshop Data Sheet
Extended Warranty Registration

This Product Is Available At:

AVAILABLE THROUGHOUT THE COUNTRY AT THESE TRUSTED RETAILERS
CONTACT

Email
customerservice@dgcproducts.com
sales@dgcproducts.com


Address
DGC Products, Inc.
2520 Fairview St. Ste A-2
Santa Ana, CA 92704

PAGES
  • Home
  • About
  • FAQs
  • Warranty
  • Dealer Signup
PRODUCTS
  • i-Socket Workshop®
  • View Cart(1)
  • Checkout
© DGC Products Inc. All Rights Reserved. I-Socket® and I-Socket Technology® are registered trademarks of DGC Products Inc.Privacy Policy